Commercial
Military
Sports & Technical Diving
Rescue
Dry Suit Accessories
Customer Inquiries
Chemical and Biological Test Results
Size Charts
The PRO-AM is a vulcanized rubber suit manufactured
from a NR/EPDM blend. This medium weight suit features good stretch
characteristics for comfort, and a three layer construction for
durability. PRO-AM suits are ideal for sports, military, rescue, and
light commercial applications.
Average material weight: 1200gm/m2
Easy to clean and repair
Vulcanized seams, lifetime seam warranty
Carbon-black reinforced boot sole and crotch area
Pyramid reinforced shoulders, waist, and knee/shin area
Heavy duty manchette wrist seals
Optional fitted neoprene, latex, or rubber hoods
Glove ring systems available
Boot size options, and safety boots available
The PRO-HD is a tough NR/EPDM blend rubber suit
made to endure the harshest conditions. The
PRO-HD features extensive reinforcements and OVERSIZE BOOTS made to accommodate
extra under socks for extended cold-water immersion. PRO-AM boot sizes
can be fitted if the suit is to be used with fins. The PRO-HD can be fitted with a
variety of helmet yoke options.
Average material weight: 1600gm/m2
BDM 6 pitch heavy duty zip
Vulcanized seams, lifetime seam warranty
Carbon-black reinforced boot sole and crotch area
Extensive shoulders, waist, and knee/shin reinforcements
Smooth exterior for easier decontamination
Yokes available for all leading helmets
Glove ring systems available
Choice of smaller volume boots for sports diving
Neoprene, latex, or rubber hood options
Each suit supplied with a hold-all, repair kit and manual
Pro HD 1500 with 12-Bolt Helmet Yoke 
The PRO-HRM is the latest addition to the
vulcanized rubber suit range. This suit is manufactured from a newly
constructed compound which is designed for use in contaminated water conditions
where a high degree of resistance is required. As an example, the PRO-HRM
is 85% more resistant to JP8 jet fuel, and is 3 times more abrasion resistant
than a PRO-AM suit ("TRI" & "SATRA" test
results). This is the ultimate suit for those polluted water conditions
often experienced by military and rescue divers.
Average material weight: 1200gm/m2
Easy clean exterior
BDM 6 pitch heavy duty zip
Vulcanized seams, lifetime seam warranty
Helmet yoke options available
Glove ring systems available
Hood options available
Latex glove and mitt options
Supplied with a hold-all, repair kit and manual
The PRO-CBX is a tri-laminate suit manufactured
from a brand new Cordura/Butyl/Polyester material, which replaces previously
favored nylon materials. The Cordura textured outer surface is extremely
hard wearing, whilst feeling softer and more comfortable than traditional nylon
tri-laminates. Independent taber abrasion tests (ISO 5470-1980) on the
Cordura showed exceptional wear properties. Ideal for sports divers who
regularly carry out wreck dives, or who dive in a harsh environment. This
material is also ideal doe search and rescue operations , where comfort and
durability are of equal importance
Average material weight: 450gm/m2
Hard wearing textured Cordura exterior
Vulcanized seams, lifetime seam warranty
Easy entry polyester interior
Gates latex covered neoprene boots
Detachable braces included
The PRO-VSN is a hybrid stretch tri-laminate suit, manufactured by,
and unique to Gates.
The material comprises of an inner and outer later of "Armatex" jersey nylon, with mid-ply of specially compounded rubber.
The overall material gauge is approximately 2mm. The material is non-compressible, therefore you will experience absolutely no loss in buoyancy or insulation.
This tough wearing, comfortable suit features out Vulca-seam jointing technique for peace of mind, and includes Gates own 5mm lined neoprene latex covered boots.
There are a variety of accessory options including pockets, relief zips, warm neck collar or attached hood.
PRO-VSN Tek
Average material weight: 1100gm/m2
Unique hybrid stretch material
Armatex jersey nylon exterior
Non-compressible stretch material
Vulcanized seams, lifetime seam warranty
Flexible, warm 5mm neoprene lined latex covered boots
Glove ring systems available
Complete with adjustable, removable braces
Durable rubber knee-pads
Gates has created a range of suits and suit
options specifically designed for use by surface based rescue personnel who
require a functional, but hard-wearing suit. The SRS and CRS suits are
manufactured from CBX Cordual/butyl/polyester material with an average material
weight of 450gm/m2. Both suits are self don, and come as
standard with steel roe safety boots, although heavy duty latex boots are an
option. Gates has developed a method of adding reflective bands to arms, legs,
etc. and are also capable of producing reflective chest or back labels for
high-visibility.
Average material weight: 450gm/m2
Tough, abrasion ressistant Cordura/Polyester material
Self don pattern
Steel toe safety boots
Optional reflective bands and badges
Options include a variety of pockets
Two color varieties: Black/Black and Black/Orange
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |