KIRBY MORGANKM Diamond w/MWPC | Aqua-Air Industries

Item #: 500-711

Availability: CALL FOR AVAILABILITY

The Kirby Morgan Diamond^® Is The Next Modular Variation To The KMDSI Stainless Steel Helmet. When The KM Diamond Is Attached To Our Stainless Steel Helmet Shell The Diver Can Operate In Either A Surface Exhaust Or Ambient Water Exhaust Diving Mode.

Before the diver enters the water, with a simple two-step process, they have the opportunity to switch the helmet into surface vent mode where their exhaled gas is sent to the surface and not into the surrounding water where they are working. On the surface the exhaled gas can be sent to a reclaim system or simply secured on an open deck to vent into the atmosphere. The KM Diamond can be also operated in the open circuit mode for the entire dive.

The advantages of this stainless steel helmet include the following:
– Rugged helmet shell and other components
– No refinishing required if the surface is scratched or gouged
– Elimination of threaded inserts for securing port retainer to helmet shell

Price: CALL

Quantity:

Estimate Shipping

Weight: Kirby Morgan Diamond® - 34.8 pounds

Helmet Shell: Stainless Steel

Control Knobs: PolyurethaneFace

Port/Lens:Scratch Resistant Polycarbonate

Neck Dam:Neoprene. Optional latex neck dam available

O-Rings: Buna-N

Head Cushion: Nylon bag filled with #4 Polyester foam

Recommended Lubricants: Kirby Morgan recommends Christo-Lube® or equivalent for all gas train components. Dow Corning® 111 Silicone or equivalent may be used for this helmet ONLY when noted.

Inhalation Regulator: The Inhalation body and Pod is one complete unit with the regulator based on the Kirby Morgan 455 Balanced Regulator.

CR Standards: This helmet meets or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.

Note The minimum operating temperature recommended for this helmet is 34 °F (1 °C), without the use of the water shrouds and hot water. Without a hot water and the shroud system, the diver may be subject to hypothermia due to cold gas inspiration temperatures.

Part BlowApart

Spec Sheet

KM Diamond w/MWPC

The Kirby Morgan Diamond^® Is The Next Modular Variation To The KMDSI Stainless Steel Helmet. When The KM Diamond Is Attached To Our Stainless Steel Helmet Shell The Diver Can Operate In Either A Surface Exhaust Or Ambient Water Exhaust Diving Mode.

Weight: Kirby Morgan Diamond® - 34.8 pounds

Helmet Shell: Stainless Steel

Control Knobs: PolyurethaneFace

Port/Lens:Scratch Resistant Polycarbonate

Neck Dam:Neoprene. Optional latex neck dam available

O-Rings: Buna-N

Head Cushion: Nylon bag filled with #4 Polyester foam

Recommended Lubricants: Kirby Morgan recommends Christo-Lube® or equivalent for all gas train components. Dow Corning® 111 Silicone or equivalent may be used for this helmet ONLY when noted.

Inhalation Regulator: The Inhalation body and Pod is one complete unit with the regulator based on the Kirby Morgan 455 Balanced Regulator.

CR Standards: This helmet meets or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.

Note The minimum operating temperature recommended for this helmet is 34 °F (1 °C), without the use of the water shrouds and hot water. Without a hot water and the shroud system, the diver may be subject to hypothermia due to cold gas inspiration temperatures.

You May Also Like

NITROX PANEL

AAI AC250 TWO DIVER AIR CONTROL CASE

AAI THREE DIVER GAS CONTROL CONSOLE

AIR DIVING COMMAND CENTER

Physical Address:

Contact Us:

KM Diamond w/MWPC

The Kirby Morgan Diamond® Is The Next Modular Variation To The KMDSI Stainless Steel Helmet. When The KM Diamond Is Attached To Our Stainless Steel Helmet Shell The Diver Can Operate In Either A Surface Exhaust Or Ambient Water Exhaust Diving Mode.

Weight: Kirby Morgan Diamond® - 34.8 pounds

Helmet Shell: Stainless Steel

Control Knobs: PolyurethaneFace

Port/Lens:Scratch Resistant Polycarbonate

Neck Dam:Neoprene. Optional latex neck dam available

O-Rings: Buna-N

Head Cushion: Nylon bag filled with #4 Polyester foam

Recommended Lubricants: Kirby Morgan recommends Christo-Lube® or equivalent for all gas train components. Dow Corning® 111 Silicone or equivalent may be used for this helmet ONLY when noted.

Inhalation Regulator: The Inhalation body and Pod is one complete unit with the regulator based on the Kirby Morgan 455 Balanced Regulator.

CR Standards: This helmet meets or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.

Note The minimum operating temperature recommended for this helmet is 34 °F (1 °C), without the use of the water shrouds and hot water. Without a hot water and the shroud system, the diver may be subject to hypothermia due to cold gas inspiration temperatures.

You May Also Like

NITROX PANEL

AAI AC250 TWO DIVER AIR CONTROL CASE

AAI THREE DIVER GAS CONTROL CONSOLE

AIR DIVING COMMAND CENTER

Physical Address:

Contact Us:

The Kirby Morgan Diamond^® Is The Next Modular Variation To The KMDSI Stainless Steel Helmet. When The KM Diamond Is Attached To Our Stainless Steel Helmet Shell The Diver Can Operate In Either A Surface Exhaust Or Ambient Water Exhaust Diving Mode.